Some people spend as much money on a kitchen as they do a car, yet expect to do no maintenance.
Would you be surprised if your truck engine overheated if you never changed the oil or refilled the coolant? Most also expect to rotate and replace tires and wiper blades.
You might not have spent 13 grand-something on a fridge, but I’m sure you plunked down a good amount. Here are some maintenance tips to help get your return on that investment. See my previous post, “Ice maker troubleshooting.”
Moisten your gasket
A small amount of condensation on the fridge or freezer is normal, especially during humid weather and summer vacation, if you have kids who don’t know how to keep the refrigerator doors shut.
If you see more condensation than normal, check the seal (or gasket as we appliance nerds call it) for any obstructions and clear them. If there aren’t any, try moistening the gasket with Vaseline. Seriously, it works. If you don’t have any petroleum jelly, I’ve used Neosporin in a pinch (What won’t that stuff do, honestly?).
After applying a thin layer of Vaseline, organize your fridge. It doesn’t have anything to do with the seal, per se, but it will help you find what you need faster, meaning the door won’t be open as long. If Warners’ Stellian installed your fridge, we leveled it to tilt slightly back to encourage the doors to swing shut.
If someone else installed your fridge, consider leveling it in a similar way.
Clean your coils
New refrigerators have self-cleaning condensers. But if you have an old fridge, you might still have coils that need to be cleaned once or twice a year. Some fancy vacuum cleaners have attachments to suit this purpose. But otherwise, you’ll have to get a coil brush from an appliance parts store.
(If you find yourself driving to an appliance parts store to buy a coil brush, make a detour and buy a new fridge instead because yours is pretty darn old. The energy grid will thank you.)
To clean the coils, remove the base grille and use the brush or vacuum attachment to clean it, the open areas behind the grille, and the front surface area of the condenser.
If you have pets or hairy, shedding family members, take care that the area around the refrigerator stays clear to ensure proper heat exhaust. Otherwise, that thing will be running all the time.
Change the water filter
If you have a water dispenser, you likely have a water filter. Replace it every six months or take direction from your indicator light, if you have one. Or, if odor and odd taste don’t cramp your style, stretch the life of it. But seriously, beyond water quality, an old water filter can cause sediment to build up and cause problems.
There are probably seven different types of water filters. Yours is either is the top back corner of the interior, down in the kick plate, or along the top interior of the fridge. ALWAYS bring your filter into the store when you’re replacing it because we don’t necessarily know the type a filter goes with a model number we looked up in your order from two years ago. We can guess, but it’s still a guess.
After replacing the filter, flush the air from the water system (see how to purge air from the water system animation – though 4 gallons seems like overkill) to prevent dripping from the dispenser.
Defrost your freezer?
Your freezer is probably “frost-free,” meaning it defrosts itself. You may have purchased an all-freezer unit that is manual defrost for storing foods long-term, but that’s another blog post (or e-mail me).
Just take care to clean your fridge and freezer every month.
Your turn: What did I miss?
Share your tips in the comments.